gate-drive
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Is there any reason I can't reuse a gate driver for a number of parts in parallel? |
|
1 | 68 | March 1, 2022 |
| Is it advisable to put CM chokes on PI type filters at the input of the gate driver? |
|
1 | 52 | February 28, 2022 |
|
There is little overhead between the recommended drive voltage and the absolute maximum gate drive voltage. How do I handle this?
|
|
1 | 27 | February 28, 2022 |
| Using the EPC21601, is it possible to drive the gates of a BLF189XRA (1500 Watt Power LDMOS) in a push pull manner |
|
1 | 34 | February 28, 2022 |
| What would you advise for high current designs, paralleling multiple FETs closer to each other or paralleling outputs of multiple separate half bridges with optimal layout per half bridge? |
|
1 | 31 | February 27, 2022 |
| What would be the impact of putting the gate driver in the opposite layer as the FET? |
|
1 | 30 | February 27, 2022 |
| Do EPC GaN FETs require a negative gate drive voltage? |
|
1 | 56 | February 27, 2022 |